Welcome to HDPE.com

Hand-Operated Machines

Designed with the precision that only McElroy provides, our hand operated fusion machines will butt fuse ½” CTS to 4” IPS polyethylene pipe. Light weight and rugged, these compact machines deliver a perfect fusion joint every time. Some models have sidewall and saddle fusion capabilities.

MiniMc
Fuses:
1/2" CTS-1" IPS
(16mm - 32mm)

Socket Fusion
Fuses:
1/2" CTS-4" IPS

No.2LC
Fuses:
1/2" CTS-2" IPS
(16mm - 60mm)

Sidewinder
Saddle Fusion for branch Saddles, Tapping tee's, and Service Saddles

PitBull No.14
Fuses:
1" IPS-4" DIPS
(32mm - 110mm)

No. 2CU
Fuses:
1/2" CTS-2" IPS
(16mm - 60mm)
Saddle Fusion Capability

PolyHorse™

Patent Pending System for Pipe Handling; 3” through 20” pipe; 40,000 lbs Capacity; One man operation; Easy Setup; Compact transport; Huge Productivity Gains. [more information...]

No. 28

McElroy No.28 Machines will butt fuse pipe sizes from 2" IPS - 8" DIPS (63mm - 225mm). All models incorporate the interchangeable No.28 carriage, which can easily be removed for in-ditch use, and features McElroy's patented Centerline Guidance System. The CU (Combination Unit) adds saddle fusion capability of up to an 8" DIPS (200mm) branch on any size main. Two fixed and movable clamping jaws result in precision pipe alignment for higher quality fusion joints. The machines are DataLogger® compatible and can fabricate segmented ells with optional mitered inserts. [more information...]

250

McElroy 250 Machines will butt fuse pipe sizes from 63mm - 250mm (2" IPS - 8" DIPS). All models incorporate the interchangeable 250 carriage, which can easily be removed for in-ditch use, and features McElroy's patented centerline Guidance System. The CU (Combination Unit) adds saddle fusion capability of up to a 200mm (8" DIPS) branch on any size main. Two fixed and movable clamping jaws result in precision pe alignment for higher quality fusion joints. The machines are DataLogger® compatible and can fabricate segmented ells with optional mitered inserts. [more information...]

No. 412

McElroy No.412 Machines will butt fuse pipe sizes from 4" IPS - 12" DIPS (110mm - 340mm). All models incorporate the interchangeable No.412 carriage with McElroy's patented Centerline Guidance System. Two fixed and movable clamping jaws result in precision pipe alignment for higher quality fusion joints. The machines are DataLogger® compatible and can fabricate segmented ells with optional mitered inserts. [more information...]

No. 618

McElroy No.618 Machines will butt fuse pipe sizes from 6" IPS - 18" OD (180mm - 450mm). All models incorporate the interchangable No.618 carriage with McElroy's patented Centerline Guidance System. Two fixed and movable jaws result in precision pipe alignment for higher quality fusion joints. The machines are DataLogger® compatible and can fabricate segmented ells with optional mitered inserts. [more information...]

500

McElroy 500 Machines will butt fuse pipe sizes from 6" IPS - 20" OD (180mm - 500mm). Allmodels incorporate the interchangeable 500 carriage with McElroy's patented Centerline Guidance System. Two fixed and movable clamping jaws result in precision pipe alignment for higher quality fusion joints. The standard manifold machines are DataLogger® compatible and can fabricate segmented ells with optional mitered inserts. [more information...]

No. 824

The No.824 MegaMc® is an electric hydraulic fusion machine. The machine allows for butt fusion of most fittings without special holders or removal of outer jaw. Mitered inserts are available for fabricating ells. McElroy's unique semi–automatic control system requires only one operator. Hydraulic power assists all fusion functions including the complete operation of the jaws, pipe lifts, heater, and facer. [more information...]

No. 1236/900

McElroy MegaMc® No.1236 & Tracstar 900 machines will butt fuse pipe sizes from 12" IPS - 36" OD (340mm - 900mm). The machine allows for butt fusion of most fittings without special holders or removal of the outer jaw. Mitered inserts are aailable for fabricating ells. McElroy's unique semi-automatic control system requires only one operator. Hydraulic power assists all fusion functions including the complete operation of the jaws, pipe lifts, heater, and facer. Both machines incorporate McElroy's patented Centerline Guidance System. The standard manifold No.1236 is DataLogger® compatible. [more information...]

No. 1648

McElroy MegaMc® No.1648 will butt fuse pipe sizes from 16" OD - 48" OD (450mm - 1200mm). The machine allows for butt fusion of most fittings without special holders or removal of the outer jaw. Mitered inserts are available for fabricating ells. McElroy's unique semi-automatic control system requires only one operator. Hydraulic power assists all fusion functions including the complete operation of the jaws, pipe lifts, heater, and facer. It also incorporates McElroy's patented Centerline Guidance System and is DataLogger® compatible. [more information...]

No. 2065

McElroy MegaMc® No.2065 machines will butt fuse pipe sizes from 20" OD - 65" OD (500mm - 1600mm). The machine allows for butt fusion of most fittings without special holders. Mitered inserts are available for fabricating ells. McElroy's unique semi-automatic control system requires only one operator. Hydraulic power assists all fusion functions including the complete operation of the jaws, pipe lifts, heater, and facer. It also incorporates McElroy's patented Centerline Guidance System and is DataLogger® compatible. [more information...]

Hand-Operated Machines

Designed with the precision that only McElroy provides, our hand operated fusion machines will butt fuse ½” CTS to 4” IPS polyethylene pipe. Light weight and rugged, these compact machines deliver a perfect fusion joint every time. Some models have sidewall and saddle fusion capabilities.